Technology ROSA EDGE

ROSA EDGE series features modern edge lighting system. Introduced edge lighting technology is widely used in the
display construction such as monitors, televisions, tablet screens etc.

Edge lighting in this series is the introduction of light wave to the edge of the light elements, which scatter light outside. With the light source turned off these elements are crystal clear, and during operation the light is uniformly diffused over the entire surface. Light diffusing effect is achieved by unique combination of PMMA produced by a renowned company EVONIK, which provides durability and high light transmission rate.

Used in ROSA EDGE series lighting elements in the form of LEDs are not directly visible and relatively large (several hundred times larger than the light source) light emitting surface minimize the glare. As a light source in these structures are high-performance modules with LEDs of warm white colour temperature 3500 K and neutral white – 5000 K. There is also possibility of other colour variations - blue, red or green.

Operation principles

ROSA EDGE diffusers are made of polymethyl methacrylate (PMMA) with added spherical beads.

Due to the illumination of the upper and / or lower edges of transparent diffusers, the light emits evenly throughout the surface.

LED light source
Installed in half-ring shapes high-
performance LED modules with 3500 K
warm white and neutral white – 5000 K
and in an alternative range of colours
(blue, red, green)

Smooth design
Built in the contour of the columns provides
aesthetic design and solid construction

Driver Philips Xitanium
DC, high-performance driver with
7 programmable functions according
to customer requirements

Programmable time profiles
The driver function with maximum 5 power
levels in the range from 10 to 100% rated
power in the selected luminaire operating
time

Illumination without glare
Large edge-lit surface area
ensures low glare, it is clearly
visible from the distance for
drivers as well as pedestrians

Functions

  • Lighting up the sidewalks (increasing the sense of pedestrian safety)
  • decorative element, emphasize surroundings
  • information carrier designating urban infrastructure zones (eg. parking signs, pedestrian crossings)
  • Light spatial navigation (eg. turns, especially dangerous)
  • Improve road safety and ride comfort by using the right colour of the diodes

Additional illumination of sidewalks and bicycle paths

Optical guidance

Technology savings thanks to EDGE


Standard lighting

 
EDGE lighting

Application

  • 1. dangerous places (sharp turns)
    2. cycle paths
    3. parking

Pro-ecological production and exploitation

Consumption reducing and cleaning systems guarantee an eco-friendly manufacturing process of EDGE LED sets.

The aluminium housing is 100% recyclable and used LEDs do not emit UV rays or infrared radiation. It achieves a luminous efficacy of up to 90 lm / W. They consume less energy compared to conventional light sources, which reduces CO2 emissions.

Optionally, we can offer colour variants

EDGE 1 LED EDGE 2 LED

Kolor:
Kod:

green
4273127/G

blue
4273127/B

red
4273127/R

green
4273129/G/G

blue
4273129/B/B

red
4273129/R/R

green/red
4273129/G/R

blue/red
4273129/B/R

white/red
4273129/6/R

Edge lighting in park lighting

FLARE LED and SLICE LED lighting bollards 1000 - 1300 mm high which are made of anodised aluminium, dedicated to illumination of parks, squares, residential streets, car parks, etc.

The FLARE LED has 1 or 2 light-emitting diffuser (Ø 150 mm).
The two-diffuser variant allows for optional configuration of light effects in the available colour range (white, warm white, red, green, blue).

The SLICE LED bollard is equipped with a single cylinder shaped diffuser (Ø 40 mm) with a length of 100 or 300mm.

Aluminium housing
Aluminium housing
Light diffusion surface
Lamp diffuser
Light sources
Light sources
Light diffusion
surface
Lamp diffuser

LED lighting set

ROSA EDGE Series of products with backlighting system